What is Scientific Remote Viewing®?

[ruth]

What is Scientific Remote Viewing®?

Scientific Remote Viewing (SRV®) is a trainable mental procedure that can assist a person in obtaining accurate and detailed information from distant locations and across time. Simply, SRV is a controlled shifting of awareness that is performed in the normal waking state of consciousness. SRV uses the human nervous system in a way analogous to the way an astronomer uses a radio telescope. Using SRV, the human nervous system acts as a tuning device that connects us to an underlying field of nature through which knowledge of all things is possible.
SRV does NOT involve an out-of-body experience.

SRV does NOT use hypnosis.

SRV does NOT involve an altered state of consciousness.

SRV is NOT channeling.

The term "Scientific Remote Viewing" refers to a set of procedures that are an evolving although largely standardized methodology used for remote viewing. Current research suggests that the correct use of these procedures allows virtually any normal individual to obtain information about a remote location with surprisingly high levels of accuracy.

SRV has a number of distinct phases, each of which is designed to allow the viewer to perceive various aspects of a target. A target is the location, person, or event about which information is desired. In each phase, different types of information are extracted about the target, and the overall result typically includes a wide variety of descriptive data, including sketches.

In our view, the ability to train someone to remote view constitutes positive proof of the existence of a nonphysical aspect for all humans (i.e., a soul), since in the absence of such an aspect, remote viewing would not be possible. Indeed, this discovery is perhaps the most important fact to emerge from the development of the modern remote viewing research program.

[ruth]

SRV® Vocabulary List



Advanced SRV - Of the three current forms of SRV (Basic, Enhanced, and Advanced) that are used to describe physical targets, this is the most sophisticated. It involves the use of complex pre-printed templates, highly-structured spacial and temporal moving exercises, and significant detail in sketching, probing, and analysis. The intent of the Advanced SRV procedures is to assist the viewer in assembling a more coherent picture of the target by “gluing” various partial perceptions together. This is often used to produce a map of the target and its surrounding environment.

Basic SRV - This is a version of SRV that is used by all beginning viewers. It incorporates all of the essential components of Enhanced SRV, but it does not utilize some of the more advanced sketching and movement procedures.

Bilocation - At some point during the SRV session, the viewer's attention is so strongly directed toward the target that the viewer's awareness is split between his or her physical location and the target site.

Concepts - these are intangible attributes of something that is perceived using SRV. For example, the ideas of "good" or "important" are concepts.

Cue - one or more words used at various points during an SRV session in order to direct a remote viewer’s perception to focus on a target, or perhaps to perceive specialized information for a target. The first cues used in a remote-viewing session are the target coordinate numbers. Subsequent cues are entered into the Phase 4 matrix.

Data types - When remote-viewing sessions are conducted under certain conditions, the data obtained from those sessions are classified as being of a certain “type.” There are six types of remote-viewing data.

Type 1: Solo, viewer front loaded (rarely done, data are usually of poor quality)
Type 2: Solo, viewer blind, target selected from a pre-determined list of targets by a computer or some other tasking device (commonly done)
Type 3: Solo, viewer blind, target assigned by a human tasker (commonly done)
Type 4: Monitored session with monitor front-loaded and viewer blind (very common during training)
Type 5: Monitored session, monitor and viewer blind (commonly done)
Type 6: Monitor and viewer front-loaded (rarely done, data are usually of poor quality)

Decoding - The process of trying to figure out how to describe an intuitive feeling about a target or target component using words.

Deduction - A deduction has two aspects. First, it is a mental conclusion (as in "to deduce") reached during a remote-viewing session. It represents logical mental analysis that may or may not be correct. Second, a deduction is a subtraction from the flow of data. The procedures of Scientific Remote Viewing require that a viewer declare (and thus rid the mind of) all deductions. This is necessary so that the viewer does not carry the impression of the deduction into the remainder of the session, thereby compromising the data.

Emotionals - refers to the emotions that are associated with a site. These emotions can originate from beings actually present at the site. However, a site may resonate with emotionals due to previous or even future events. Emotionals do not refer to emotions experienced by the viewer, which are VFs.

Energetics - a sense while remote viewing that a significant amount of energy is being expended at the target location. This energy can be of any type, such as kinetic or radiant.

Enhanced SRV - a version of SRV that is used by more advanced viewers. It includes expanded sketching procedures as compared with Basic SRV, as well as more specialized movement exercises. (See also Advanced SRV.)

Event - a cue that is used to direct a viewer's perception to a target location during the time of some significant activity.

Gestalt - From Webster's Third New International Dictionary, a gestalt is a "configuration of physical, biological, or psychological phenomena so integrated as to constitute a functional unit with properties not derivable from its parts in summation." With remote viewing, gestalts are normally represented with ideograms (see below).

Guided deduction - a particular type of deduction that occurs at regular intervals in the procedures of Scientific Remote Viewing. In general, such deductions are allowed to occur at specified times so as to release (and thus rid the mind of) analysis that may be developing in the mind during the session but is as yet undetected.

Ideograms - These are marks that are drawn very quickly by a remote viewer, normally in the beginning of a remote viewing session. Ideograms often resemble squiggles, sometimes curvy, sometimes straight, and sometimes with angles. The various characteristics of the ideograms tend to reflect aspects of the target for the remote-viewing session. Thus, there are ideograms for gestalts associated with mountains, structures, land, air, movement, subjects, water, and so on. Ideograms that reflect more than one gestalt are called "complex ideograms."

Magnitudes - the magnitudes of the various dimensions that are perceived in Phase 2 and Phase 4 of Basic and Enhanced SRV.

Matrix - a collection of labeled columns written on a piece of paper while remote viewing. Data are entered into the appropriate columns during the remote-viewing session.

Monitoring levels - When the viewer has a monitor who is listening to and guiding the remote-viewing session, then the level to which the monitor is involved with the data collection process needs to be stated before the session begins. These levels are defined below.

Level 1 (Type 5 data): The monitor does very little guiding at this level. The monitor's primary role is to suggest movement exercises when the data flow slows or stops. The monitor also corrects any deviations from authorized procedures. The monitor can also guide the viewer with respect to a script that specifies movement exercises at certain points during the session.
Level 2 (Type 5 data): The monitor is actively engaged in directing the remote viewer by suggesting numerous movement exercises whenever they may seem appropriate. The data flow does not have to slow for the monitor to suggest a movement exercise. The monitor also corrects any deviations from authorized procedures. The monitor can also guide the viewer with respect to a script that specifies movement exercises at certain points during the session.
Level 3 (Type 4 data): The monitor's primary role is to suggest movement exercises when the data flow slows or when the viewer no longer seems focused on the target. Using occasional movement exercises only, the monitor should ensure that the viewer achieves the maximum degree of target description possible by the end of the remote-viewing session. The monitor also corrects any deviations from authorized procedures. The monitor can also guide the viewer with respect to a script that specifies movement exercises at certain points during the session.
Level 4 (Type 4 data): The monitor is actively engaged in the data collection process by offering numerous movement exercises that assist the viewer in focusing on the most important target attributes. The data flow does not have to slow for the monitor to suggest a movement exercise. The monitor also corrects any deviations from authorized procedures. The monitor can also guide the viewer with respect to a script that specifies movement exercises at certain points during the session.
Level 5 (Type 4 data): The monitor is actively engaged in all aspects of the data collection process. This includes an evaluation of all or most data entries. This type of monitoring level is appropriate for occasional use only, or in certain instructional situations. The monitor can state the word "check" after each datum that is appropriate for the target, or the monitor can remain silent if it is unclear whether or not a datum is appropriate. The monitor can state the word "reject" if a datum is inappropriate for the target. The viewer records all data, but puts a line through all rejected data entries.

Movement exercise - an SRV procedure that relocates a viewer at a new location relative to the previous target perspective.

Numbered target aspects - (See target aspects)

Outbounder - A person who physically travels to — and witnesses — a target location as a means of guiding the perceptual focus of a remote viewer. The remote viewer is usually tasked with describing the target as seen by the outbounder.

Phases 1 through 5 - separate phases of Basic and Enhanced Scientific Remote Viewing. The specific phases are structured as follows:

Phase 1: This phase allows the viewer to make initial target contact based on the target coordinates.
Phase 2: This phase increases the contact with the target. Information obtained in this phase includes sounds, textures, temperatures, visuals (such as colors, luminescence, and contrasts), tastes, and smells.
Phase 3: This phase involves an initial sketch of the target.
Phase 4: Target contact in this phase can be profound. Phase 4 involves the use of a matrix within which to enter the data.
Phase 5: In this phase, the remote viewer can engage some limited conscious intellectual activity to do certain specified tasks. This is where time lines and geographical locational diagrams are performed.

Physicals - physical items that are perceived and identified in SRV.

Senses - sounds, textures, temperatures, visuals (such as colors, luminescence, and contrasts), tastes, and smells.

Session time - the date and time that a remote-viewing session takes place.

Signal/signal line - the data stream that is perceived during the SRV session.

SRV - Scientific Remote Viewing.

Structure - the formal procedures of SRV. "Remaining in structure" refers to a viewer closely adhering to these procedures during a remote-viewing session.

Subspace - anything that is on the other side of the physical divide. Such things include subspace beings (for example, spirits), but can also include subspace planets, vehicles, and virtually anything else that may or may not have a parallel in the physical realm.

Target - something that is described by remote viewing. Typical remote-viewing are places, events, or people. Targets normally are specified with respect to time and date.

Target aspects - Often it is useful to place two or more numbered target aspects in a target cue. These are normally locations from which the viewer is to perceive the target. The remote viewer is only told how many target aspects exist for a given target, and the viewer then executes movement exercises at precise moments during a session to place his or her perspective at that location before continuing the session. Target aspects are more effective than target qualifiers (see target qualifiers) in shifting the location of a remote viewer’s perspective.

Target directional - In experimental research, the first page of an SRV session often uses a form called a "target directional." This form contains perspective instructions for perceiving the target. The target directional contains no content information regarding the identity or characteristics of the target. Content information (the identity or description of the target) is restricted to the target specific (see below).

Target qualifiers - This is a list of two or more items that the tasker wants the remote viewer to observe during the remote-viewing session. Qualifiers help define a given target, especially when the target is not accompanied by a picture. Target qualifiers are not as effective as target aspects (see target aspects) in shifting the viewing perspective of the remote viewer.

Target specific - the actual content of the target, such as a place, subject, event, etc. The viewer sees the target specific only after the remote-viewing session is completed.

Target time - the date and time of the target event.

Tasking time - the time and date that a person assigns (i.e., determines) a target for a remote-viewing session.

Viewer feeling - an emotional response by the remote viewer to something that is perceived during the remote-viewing session. SRV requires viewers to declare (and thus to rid the mind of) all VFs to prevent contamination of the data with internalized emotions.

Viewing time - same as session time (see above)

[ruth]

The Farsight Voyager Audio Course for
Scientific Remote Viewing®

Below is a collection of free audio materials available for learning SRV®. You need to be at least 18 years of age and of sound mental health to use these materials. Please read our DISCLAIMER policy.

Directions: Due to the popularity of the free Farsight Voyager audio course in SRV®, we are now offering the downloadable files from this web page. The audio files can run on any MP3 player (like an iPod) or any computer. You need to be at least 18 years of age to use these materials.

These files are free and are available in MP3 (encoded with MP3PRO) format. You can play them on your iPod or other MP3 player, or on your computer with Winamp, MusicMatch, Windows Media Player, iTunes, Real Player or other MP3 program. The remote-viewing sessions should take place in a distraction-free environment. The sound quality of the files are of high quality. You have the option of burning the files to audio CDs for easy playback on any CD player.

These are not streamed files. You must first save these files to your hard disk, unzip them (using Windows Explorer or WinZip), and then and play them. When you download the files, you need to place them in a directory of your choice.

To use these files after you copy them to your computer's hard drive, either transfer them to your MP3 player or play them directly from your computer. If you do your remote-viewing lessons near your computer, try not to face the computer when you do your sessions so that you are not distracted. Do each lesson sequentially. Do not skip around.

Note 1: Once you download these files, please share them on whatever file-sharing networks you may be using. We want you to download and to use these files. But be aware that it is expensive for us to offer these files from our web site due to bandwidth costs. Thus, you help us a lot if you help other people obtain these files. It is LEGAL for you to share these files. If you are using these files with friends, please burn them to a CD and give them copies. But please note that these files may NOT be sold under any circumstances.

Note 2: These files are for people to use who want to understand more about SRV® independently of working with a personal certified instructor. To work with a certified instructor of SRV®, students should contact the Farsight Director of Educational Coordination and register for a course offered by a certified independent instructor.

Note 3: These files are large, and if you are connecting to the Internet with a 56K or slower modem, you may want to go to a friend's house where there is a cable or DSL Internet connection and download the files from there.

Farsight Voyager Lessons 1-6 (38.2 megs)
Lesson 1: Overview (30 minutes)
Lesson 2: Consciousness Settling Procedure (30 minutes)
Lesson 3: Getting Ready & Phase 1 (30 minutes)
Lesson 4: Ideograms, Part I (30 minutes)
Lesson 5: Ideograms, Part II (30 minutes)
Lesson 6: Ideogram Rut, Deductions, and Preparations (30 minutes)
Farsight Voyager Lessons 7-12 (51.6 megs)
Lesson 7: Session 1 (45 minutes)
Lesson 8: Session 2 (45 minutes)
Lesson 9: Phase 2 (30 minutes)
Lesson 10: Phase 3 (30 minutes)
Lesson 11: Session 3 (45 minutes)
Lesson 12: Session 4 (45 minutes)
Farsight Voyager Lessons 13-18 (58.2 megs)
Lesson 13: Phase 4, Part I (30 minutes)
Lesson 14: Phase 4, Part II (30 minutes)
Lesson 15: Session 5 (60 minutes)
Lesson 16: Session 6 (60 minutes)
Lesson 17: Session 7 (60 minutes)
Lesson 18: Session 8 (60 minutes)
Farsight Voyager Lessons 19-24 (78.8 megs)
Lesson 19: Session 9 (60 minutes)
Lesson 20: Session 10 (60 minutes)
Lesson 21: Session 11 (60 minutes)
Lesson 22: Session 12 (60 minutes)
Lesson 23: Session 13 (60 minutes)
Lesson 24: Session 14 (60 minutes)

DISCLAIMER

www.farsight.org/SRV/SRVaudioindex.html

[ruth]

www.farsight.org/SRV/SRVmanualindex.html

Please visit the site to do this!

Below is a list of free materials available for learning SRV®. You need to be at least 18 years of age and of sound mental health to use these materials. Please read our DISCLAIMER policy.

THE ONLINE TEXT: Three forms (or levels) of SRV have been developed at The Farsight Institute that are designed to assist remote viewers in describing physical targets at various geographical locations. These are Basic SRV, Enhanced SRV, and Advanced SRV. These forms of SRV should not be confused with other SRV processes that are used to describe things other than physical targets at specified locations, such as technologies, societies and groups, as well as geographical locators and numerical procedures. Advanced SRV should only be performed by a viewer who has mastered both Basic SRV and Enhanced SRV. Doing otherwise might lead to confusion and possibly poor performance.

[ruth]

www.farsight.org/SRV/index.html

Next, please visit back to the site to read the manual you can download

[ruth]

There is so much information, I just wanted to give you a taste of what's there. Please finish with this site for the rest of the coarse...THANKS

love
ruth



Examples of SRV® sessions, including some RealAudio presentations of sessions recorded live, can be found in our RESEARCH section. More sessions can be seen in our Public Demonstration of SRV area.

A target management program is available for both Windows and Macintosh systems. The program can be used to supply random target coordinates, manage lists of targets, assign target coordinates to targets in a list for subsequent blind viewing, as well as some other things. Go to the SRV Target Management Program Download Page.


Obtain random target coordinates to use with your own remote-viewing session.

[Ole]

Wow, lots of information here to read Thanks for this Ruth ;D ;D

Love
Ole

[Lightwanderer]

Great info.
Printed it and downloaded it